Dry Riser Testing

Knowing your legal responsibility


Dry riser maintenance is required under the Regulatory Reform (Fire Safety) Order 2005 with further requirements under British Standard BS9990:2015 (Code of practice for non-automatic fire-fighting systems in buildings). BS9990:2015 requires dry risers to be tested under pressure annually with a visual inspection every six months.


Get a free quote today

Click below to request a no obligation free quote.

How dry-riser testing is carried out


Our engineer pumps water into the riser at a pressure of 10 bars for around fifteen minutes to ensure there are no leaks. A loss of pressure is typically due to leakages caused by corrosion or faulty components, which would require urgent replacement. Once the issue is rectified, our engineer repeats the testing process to confirm the system is operational.


The Solution:

Our engineer tests a number of parts subject to corrosion and/or breakage. This includes the dry-riser’s washers, valves, nuts, doors, springs and rubbers. Our engineer is typically able to put right any discovered faults immediately. If this is not possible our engineer orders the required parts on your behalf. Our engineer returns to your premises at a later date in order to rectify the problem by installing the required parts

READY TO START?

Get a free quote today

Click on the button below and get a free quote